Basic Info.
Model NO.
H13 1.2344 SKD61
Standard
AISI, ASTM, DIN, JIS, GB, BS
Composition
Stainless Steel Scrap
Special Use
High-strength Steel Plate, Wear Resistant Steel, Mold Steel
Application
Tool Steel Bar
Trademark
An steel, Bao steel, Wu steel
Product Description
H13 Tool Steel Introduction:
H13 steel is the most popular and most versatile, hot work mould steel, providing a good balance of toughness, heat check resistance, and high temperature strength, in addition to moderate wear resistance. H13 steel can resist softening to 550°C and has good resistance to heat checking.
H13 Tool Steel Applications:
H13 steel is an air hardening, 5% chromium die steel, which is an excellent choice for a wide range of hot work and cold work applications. Typical applications include die casting dies for aluminium, magnesium and zinc, extrusion dies for aluminium and brass, liners, mandrels, pressure pads, followers, bolsters, die cases, die holders and adaptor rings for copper and brass extrusion. H13 steel is used to produce hot stamping and press forge dies, split hot heading dies, gripper dies, hot punching, piercing and trimming tools. Other applications include plastic moulds, shear blades for hot work and hot swaging dies.
H13 Tool Steel General Properties:
H13 steel is characterized by
Good resistance to abrasion at both low and high temperatures.
High level of toughness and ductility Uniform and high level of machinability and polishability.
Good high-temperature strength and resistance to thermal fatigue.
Excellent through-hardening properties.
Very limited distortion during hardening.
Good machinability.
H13 Tool Steel Quality Standard:
ASTM A681 Standard Specification for Tool Steel
H13 Tool Steel All Grades Comparison:
AS 1239 | ASTM A 681 | BS 4659 | BS EN ISO 4957 | JIS G 4404 | Werkstoff |
H13A | H13/UNS T20813 | BH13 | X40CrMoV 5-1 | SKD 61 | 1.2344/X40CrMoV5-1 |
H13 Tool Steel Chemical Composition(%):
Steel Grade | C | Si | Mn | P | S | Cr | Mo | V |
H13 | 0.32-0.45 | 0.90-1.25 | 0.20-0.60 | 0.030 max | 0.030 max | 4.75-5.50 | 1.10-1.75 | 0.80-1.25 |
DIN1.2344 | 0.35-0.42 | 0.80-1.20 | 0.25-0.50 | 0.030 max | 0.030 max | 4.80-5.50 | 1.20-1.50 | 0.80-1.15 |
SKD61 | 0.35-0.42 | 0.80-1.20 | 0.25-0.50 | 0.030 max | 0.020 max | 4.80-5.50 | 1.00-1.50 | 0.80-1.15 |
H13 Tool Steel Heat-Treatment Option
1 Annealed:
2 Vacuum heat treatment : Quenched and Tempered
Type | Preheat Temperature,°F (°C) | Salt Bath | Controlled Atmosphere Furnaces | Austenitizing Time (minutes) | Quench Medium | Tempering Temperature,°F (°C) | Minimum Hardness,RC |
H13 | 1450 (788) | 1825 (996) | 1850 (1010) | 5-15 | Air | 1025 (552) | 52 |
H13 Tool Steel Smelting Option
ESR Electro Slag Remelting Or other smelting, please contact with us.
H13 Tool Steel Delivery Option
Package: Plastic material bundled ; wooden case ; wooden/steel pallet ; client's requirement
Payment: Paypal / TT
Transport: DHL / FEDEX / UPS / EMS
H13 Tool Steel Surface condition
Usual surface conditions are
- a) the hot-rolled or forged condition (= as hot worked),
- b) the machined (ground, polished, turned, peeled or milled) condition, and
- c) the cold-reduced condition.
Unless otherwise agreed at the time of enquiry and order, the products shall be delivered in the surface condition hot worked.
H13 Tool Steel Surface quality
1 All products shall have a smooth surface finish appropriate to the manufacturing processes applied. Minor surface imperfections, which also may occur under normal manufacturing conditions, such as prints originating from rolled-in scale, are not to be regarded as defects.
Bars shall be delivered with surface class A in accordance with ISO 9443 unless otherwise agreed at the time of enquiry and order. Plates shall be delivered in accordance with ISO 7788 unless otherwise agreed at the time of enquiry and order.
2 Ground, polished or finished-machined products shall be free from surface imperfections and surface decarburization.
3 Hot-rolled, forged, cold-drawn or rough-machined products shall be ordered with sufficient material to be removed from all surfaces by machining or grinding to allow for
- a) surface decarburization, and
- b) surface imperfections.
Providing no International Standard for the machining allowances of tool steels is available, the allowances shall be agreed at the time of enquiry and order.
H13 Tool Steel Mill's test certificate:
EN 10204/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.
Address:
Floor17, Xinlian Building, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9000
Company Introduction:
Zhongtong Weiye Special Steel Co., Ltd. is a professional and reputable steel manufacturer and exporter in Wuxi city, China. Wuxi is close to Shanghai, enjoys excellent geographic location and convenient water, land and air transportation. Wuxi become the biggest stainless steel sheet, plate and coil supply Center in China. Zhongtong Weiye as one of the largest stock-holder and manufacturers supply a complete range of Stainless steel, pipes, galvanized products, bars, strips, angle steel, nickel alloy, super alloys and other related products. The material is all famous brand including Shanxi Taigang Iron& Steel CO, . Ltd (TISCO), Zhangjiagang Pohang (ZPSS), Shanghai(BAO STEEL), Ningbo (Baoxin) etc. The company has a modern indoor warehouse, with nearly a thousand varieties in stock that is ready for same day dispatch from our warehouses. Products are mainly exported to Europe, America, Southeast Asia, the Middle East and other countries and regions. Generally, our products are widely applied in construction, bridge, car manufacturing, electrical installation and mining. We have won recognition from our clients due to our excellent credit and services. Zhongtong Weiye Special Steel Co., Ltd. Follows the tenet of "quality of survival, integrity and development". We commit to sell quality products and make quick delivery to our customers. We would like to use high quality products and excellent service to develop a bright future with our clients.
Different kinds of products are available in our company. We′re pleased to get your Inquiry and we will reply you as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.